- 30 oz Luma Steel Sublimation Blank Stainless Steel Skinny Tumbler
- White
- Clear Lid and Straw
- it features a gloss finish, and a vacuum seal that keeps liquids and carbonation fresh longer, while the stainless steel design also ensures drinks stay at the perfect temperature.
Good for both sublimation imprinting and UV. - Clear lid and metal straw included
- Full top to bottom imprinting
- Hand wash only
Time: Varies by Method
Temperature: Varies by Method
Pressure: Varies by Method
Heat Press Instructions:
Instructions for Using a DK3D Mug Press
1. Secure transfer to the Tumbler using Heat Tape.
2. Cover with protective paper
3. Wrap the tumbler with heat conductive rubber (we recommend HCR-181010 for skinny tumblers)
4. Place Tumbler in Mug Press and close the heating element
5. Press at 375 degrees for 2 minutes
6. Rotate tumbler and press for an additional 2 minutes
Instructions for Using a DK3 Mug Press
1. Secure transfer to the Tumbler using Heat Tape.
2. Cover with protective paper
3. Wrap the tumbler with heat conductive rubber (we recommend HCR-18610 for skinny tumblers)
4. Place Tumbler in Mug Press and close the heating element
5. Press at 375 degrees for 2 minutes
6. Rotate tumbler and press for an additional 2 minutes
Shrink Wrap Instructions:
Instructions for Using an Oven and SubliShrink
1. Remove all plastic parts and lids
2. Cut out design and affix to tumbler using gold heat tape
3. Cover entire tumbler with blowout paper
4. Place in SubliShrink bag
5. Use heat gun to shrink bag to tumbler
6. Place in oven for 6 minutes at 360 degrees
7. Remove from oven
8. Remove shrink bag and image from tumbler
